Avoid Making These 3 Thermostat Mistakes in Durham, NC

Temperature control is just one of the many responsibilities to keep track of when living in a house. If you make a lot of mistakes with the thermostat, it can end up costing you energy, time and money. Here’s how you can avoid three common thermostat mistakes when heating and cooling your Durham, NC, home:

Constantly Switching It On and Off

If you’re constantly cranking the temperature up and down, you’ll inevitably run into issues like energy waste and systemic pressure. You don’t want to overwork the HVAC system by switching it on and off every few hours. Try to use the thermostat less than a few times per day, especially on pleasant spring days.

Using an Incorrect Thermostat Temperature

Adjusting the temperature too high can result in overheating, which can cause the HVAC system to malfunction. It takes consistent monitoring to keep track of the household temperature. You can save a lot of money and energy just by making sure to set the thermostat at the right temperature for the right amount of time.

Installing the Thermostat in the Wrong Place

A programmable thermostat will be able to calculate a room’s temperature through its room sensors. If your thermostat is installed in an unoccupied location, such as the basement or the garage, it won’t be able to provide an accurate reading of the temperature the home needs.

To make sure your programmable thermostat is working effectively, you will need to install it in a room frequently used. Also, be sure to position it away from heat sources such as lamps or radiators.

Get an HVAC Installation in Durham, NC

Are you a Durham homeowner looking to update your HVAC system? Whether it’s a malfunctioning thermostat or a faulty HVAC system, we’ve got you covered. Contact our team at Mitchell Heating & Cooling to learn more about our home comfort services, including air conditioning installation.

Image provided by iStock

Compliance Settings
Increase Font Size
Simplified Font
Underline Links
Highlight Links